Garage ski rack design

[teletimmo]

I'm finally getting my garage organised some years after buying my house! I'm looking for inspiration for garage ski racking to mount on brick walls. Does anyone have design tips? Can ski flex be damaged if they are stored incorrectly?
Cheers

 

[Donzah]

Is the space best used vertically or horizontal?

 

[teletimmo]

Is the space best used vertically or horizontal?

Probably vertical as the gaps between the brick pillars (attached pic) may be slightly to short if I hang horizontally

 

[Donzah]

I built mine by using a flat piece of timber 100cm x 20cm x 25mm thick.
I cut grooves like this pic.
Skis and boards are vertical though.
I lined the grooves with eva

foam and trimmed neatly.

 

[teletimmo]

I built mine by using a flat piece of timber 100cm x 20cm x 25mm thick.
I cut grooves like this pic.
Skis and boards are vertical though.
I lined the grooves with eva

foam and trimmed neatly.

Awesome, looks good!

 

[skinavy]

Mine look like this. Skis held using a toe lug shaped piece of plywood.

 

[teletimmo]

Mine look like this. Skis held using a toe lug shaped piece of plywood.

Looks good too!

 

[CarveMan]

Mine look like this. Skis held using a toe lug shaped piece of plywood.

Got an attachment for pin bindings?

 

[skinavy]

Got an attachment for pin bindings?

Drill a couple of 4mm holes in the lug.

 

[Ricardo64]

Any ideas for snowboards as I have about six?

 

[Fozzie Bear]

Any ideas for snowboards as I have about six?

Use them for a staircase?

 

[Ian]

I've got mine leaning against the wall beside my bed.

 

[Ricardo64]

Ideally I would like to mount them on a wall as a feature, that way they are out of the way but enjoyable to look at.

 

[KylePee]

Ideally I would like to mount them on a wall as a feature, that way they are out of the way but enjoyable to look at.

A mate has these little plastic mounts stuck to the wall, that the board then sits in - flat against the wall and 45 deg. I'll try to find a photo

 

[BoofHead]

A pallet works well. Poles and skis without bindings stored in the back. If I want to display graphics, skis go side by side eg my Dynafits. Fits more skis if not side by side.

 

[jgm]

I have them on 3D printed mounts screwed to the wall.

 

[BoofHead]

I have them on 3D printed mounts screwed to the wall.

Tidy

 

[Spence]

Ideally I would like to mount them on a wall as a feature, that way they are out of the way but enjoyable to look at.

My friends place in Jindy. You can never have too many. Apparently.

 

[almontyrat]

I have them on 3D printed mounts screwed to the wall.

Can you print me some right and left 75mm tele toe mounts for a fee?

Actually that won't work either sadly as the bull dogs and other burnt mountain bindings either have the three pins or the brake retraction mechanism in the way when boot free... Be OK for the Targas and the Vice though....

 

[KylePee]

This is the sort of thing I was referring to. There are many different options with a quick google for those wanting to showcase

 

[skinavy]

A pallet works well. Poles and skis without bindings stored in the back. If I want to display graphics, skis go side by side eg my Dynafits. Fits more skis if not side by side.

I store my spare poles (and broom and mop) like this in the garage. Pallet screwed to the wall with a couple of ankascrews.

 

[BoofHead]

I store my spare poles (and broom and mop) like this in the garage. Pallet screwed to the wall with a couple of ankascrews.

Kayak and SUP paddles also

 

[Ricardo64]

My friends place in Jindy. You can never have too many. Apparently.

Totally agree

 

[SkiMountaineer]

This is the sort of thing I was referring to. There are many different options with a quick google for those wanting to showcase

I like those.

 

[Ricardo64]

I like those.

yeah, they're not bad at all. they aren't to reasonably price though