1. Use the Force filters, Guest!

    Skis     Snowboard     Telemark     Clothing     Boots     Bindings     Accessories     Roof Racks     Chains     Outdoor Gear     Wanted     Free     Sold

Wanted Small scrap of UHMWPE

Discussion in 'Gear Swap' started by Moondog55, Apr 7, 2018.

  1. Moondog55

    Moondog55 One of Us

    Joined:
    Mar 3, 2014
    Messages:
    1,293
    Likes Received:
    463
    When I say small I mean really small, only 3 or 4mm thick and credit card sized
    I have lost the thin underplate from my Voile heel pieces and they no longer supply them as a spare and the climbing wires seem to work much better with them in place.
    I actually tried a couple of old credit cards but the wire grabbed and didn't pull up smoothly.
    I'm giving the skis and bindings away but I want to give them away in fully usable condition
     
  2. Moondog55

    Moondog55 One of Us

    Joined:
    Mar 3, 2014
    Messages:
    1,293
    Likes Received:
    463
    Rays were having a sale $2.40 and I got a "Magic Carpet" type kids slider, only 1mm thick tho so it may not work.
     
  3. climberman

    climberman CloudRide1000 Legend
    Ski Pass - Gold

    Joined:
    Jul 24, 2000
    Messages:
    30,992
    Likes Received:
    13,160
    Thin cutting boards.
     
  4. Moondog55

    Moondog55 One of Us

    Joined:
    Mar 3, 2014
    Messages:
    1,293
    Likes Received:
    463
    Except that those are not usually UHMW stuff, I have tried to find a cutting bard thin enough but all of them in small sizes are 6 to 8mm thick. I'll find something sooner or later
     
  5. climberman

    climberman CloudRide1000 Legend
    Ski Pass - Gold

    Joined:
    Jul 24, 2000
    Messages:
    30,992
    Likes Received:
    13,160
    You can get ones around .5mm
     
  6. Peagreenboat

    Peagreenboat Hard Yards

    Joined:
    Jul 9, 2015
    Messages:
    113
    Likes Received:
    95
    I'm guessing you don't mean the anti-ice plates do you?
     
  7. Moondog55

    Moondog55 One of Us

    Joined:
    Mar 3, 2014
    Messages:
    1,293
    Likes Received:
    463
    No I have those, this is to give a tad less heel rise than the plates I have at the moment or I would just use a couple of old credit cards
     
  8. Peagreenboat

    Peagreenboat Hard Yards

    Joined:
    Jul 9, 2015
    Messages:
    113
    Likes Received:
    95
    Moondog, saw some super thin (2-3mm), cutting boards at an IGA in the city for an expensive $2. Could fling some in the mail if you are still hunting for this.
     
  9. Moondog55

    Moondog55 One of Us

    Joined:
    Mar 3, 2014
    Messages:
    1,293
    Likes Received:
    463
    I'll PM you later then
     
  10. axellotta

    axellotta Hard Yards

    Joined:
    Sep 28, 2015
    Messages:
    29
    Likes Received:
    26
    I have some HDPE that is about that size. PM me if you are still chasing a solution.

    Cheers,
     
  11. Moondog55

    Moondog55 One of Us

    Joined:
    Mar 3, 2014
    Messages:
    1,293
    Likes Received:
    463
    PM sending now
     
  12. Moondog55

    Moondog55 One of Us

    Joined:
    Mar 3, 2014
    Messages:
    1,293
    Likes Received:
    463
    Found and sorted Many thanx to axellotta